[ts-7000] Re: Capturing serial port to text

["mbuynak" <>]

I'd just set up a program to read from /dev/ttys1 (com1) and print it
to the screen.  Then I'd use the '>' character to redirect output to a
text file.

prompt>  ./a.out > text.txt



--- In  "yoobb" <> wrote:
>
> Does anybody have any ideas on how to easily capture serial port
input (either COM1 or 
> COM2) to a text file?  Ideally, I would like the TS-7200 to
continuously direct serial port input 
> to a text file, appending to the same file (or a new file) with each
restart.
> 
> The only idea I have so far is to install minicom and set up a boot
script that starts minicom 
> and directs it to a text file automatically.
> 
> TIA!
>




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/