This seems like the right information for getting it going. I will test
it tonight at home.
Thank you,
Michael Schmidt wrote:
>
>
>
> >I have attached a TS-9600 (with a hard drive connected) to the TS7260. I
> > would like to know how to have the TS-7260 acknowledge/recognize the
> > hard drive. I have lowered switch 1 (irq 14). If I mount the hard drive
> > through a USB attachment it is recognized as SCSI, just like any USB
> > flash drive.
> >
> > Thanks for any assistance,
> >
>
> You will need kernel support for IDE, which is documented here:
> http://oz.embeddedarm.com/~michael/support/ide-doc.txt
> <http://oz.embeddedarm.com/%7Emichael/support/ide-doc.txt>
>
> I seem to remember that only one IRQ setting is appropriate to use
> with an
> ARM board (ISA IRQ 7/ARM IRQ 40 IIRC).
>
> Regards,
>
> Michael
>
>
------------------------ Yahoo! Groups Sponsor --------------------~-->
Yahoo! Groups gets a make over. See the new email design.
http://us.click.yahoo.com/hOt0.A/lOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|