Could be as simple as writing
"module add vfat" before mounting.
//Per Öberg
Tuğrul GÜÇLÜ wrote:
> Hi
>
> I'm runnnig Debian GNU/Linux 3.1 ts7000 on TS7400 from SD Card.
> I plugged 512 Kingston over 7to1 card reader to the top USB port of the
> 7400 board.
> But I can't mount my usb disk to /mnt/removable.
>
> When i type
> :/ <:/># mount -t vfat
> /proc/bus/usb/001/003 /mnt/removable/
> mount: unknown filesystem type 'vfat'
> i get this error.
>
> if i try
> :/ <:/># mount /proc/bus/usb/001/003
> /mnt/removable/
> mount: /proc/bus/usb/001/003 is not a block device (maybe try `-o loop'?)
>
> there is no sda/sda1 in /dev ...
>
>
> Below are the outputs of lsusb and fdisk
> Thanks..
>
>
> output of lsusb
> :usb-storage-1 <:usb-storage-1># lsusb
> Bus 001 Device 001: ID 0000:0000
> Bus 001 Device 002: ID 05e3:0606 Genesys Logic, Inc.
> Bus 001 Device 003: ID 0aec:3260 Neodio Technologies Corp. 7-in-1 Card
> Reader
> Bus 001 Device 004: ID 0930:6533 Toshiba Corp. 512M USB Stick
>
> GNU nano 1.2.4 File: device
>
>
> T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
> B: Alloc= 11/900 us ( 1%), #Int= 1, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 0.00
> S: Product=USB OHCI Root Hub ub=00 Prot=00 Driver=hub
> S: SerialNumber=e0020000 55ms
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA Dev#= 3 Spd=12 MxCh= 0
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
> T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 4
> D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=05e3 ProdID=0606 Rev= 7.02
> S: Product=USB2.0 Hub ub=06 Prot=50 Driver=usb-storage
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA ms=06 Prot=50 Driver=usb-storage
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sms=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=2msms
> T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=0aec ProdID=3260 Rev= 1.8a
> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=0aec ProdID=3260 Rev= 1.8a
> S: Manufacturer=Generic
> S: Product=USB Storage Device
> S: SerialNumber=0AEC326000001A000 ub=00 Prot=00 Driver=hub
> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA 55ms
> I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
> E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=0930 ProdID=6533 Rev= 1.00
> S: Product=DataTraveler 2.0 ub=06 Prot=50 Driver=usb-storage
> S: SerialNumber=0F5048507010A94E ms=06 Prot=50 Driver=usb-storage
> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
> E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
> T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02
> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=0
> P: Vendor=0930 ProdID=6533 Rev= 1.00
> S: Product=DataTraveler 2.0
> S: SerialNumber=0F5048507010A94E ub=00 Prot=00 Driver=hub
> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA 55ms
> I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
> E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=1Dev#= 4 Spd=12 MxCh= 0
> 0 MxPS=64 #Cfgs= 1
>
> ub=06 Prot=50 Driver=usb-storage
> ms=06 Prot=50 Driver=usb-storage
>
> ub=06 Prot=50 Driver=usb-storage
> ms
> ms
> ms
>
>
> output of fdisk -l
>
> Disk /dev/sdcard0/disc0/disc: 512 MB, 512229376 bytes
> 16 heads, 32 sectors/track, 1954 cylinders
> Units = cylinders of 512 * 512 = 262144 bytes
>
> Device Boot Start End Blocks Id
> System
> /dev/sdcard0/disc0/part1 1 6 1520 da
> Non-FS d$
> /dev/sdcard0/disc0/part2 7 10 1024 da
> Non-FS d$
> /dev/sdcard0/disc0/part3 20 1954 495360 83 Linux
>
> Disk /dev/sdcard0/disc0/part1: 1 MB, 1556480 bytes
> 16 heads, 32 sectors/track, 5 cylinders
> Units = cylinders of 512 * 512 = 262144 bytes
>
>
> Disk /dev/sdcard0/disc0/part2: 1 MB, 1048576 bytes
> 16 heads, 32 sectors/track, 4 cylinders
> Units = cylinders of 512 * 512 = 262144 bytes
> Units = cylinders of 512 * 512 = 262144 bytes
>
>
> Disk /dev/sdcard0/disc0/part3: 507 MB, 507248640 bytes
> 16 heads, 32 sectors/track, 1935 cylinders
> Units = cylinders of 512 * 512 = 262144 bytes
> ------------------------------------------------------------------------
> *From:* *On
> Behalf Of *Jason Stahls
> *Sent:* Tuesday, March 20, 2007 2:02 PM
> *To:*
> *Subject:* Re: [ts-7000] RE:TS7400 documentation
>
> Quite often you can't telnet or ftp with a blank password and also
> common you can't telnet or ftp as root, so try setting a password first,
> failing that I think the file is /etc/securetty that sets up what users
> can login from where.
>
> Jsaon
>
> Tuğrul GÜÇLÜ wrote:
>
>> Hi
>> I did as its told in
>> http://tech.groups.yahoo.com/group/ts-7000/message/4959
>> <http://tech.groups.yahoo.com/group/ts-7000/message/4959>
>> and now i can boot from SD Card.
>>
>> Problem is , ftp/telnet doesn't give access to me . us:root pass:(blank)
>> any ideas?
>>
>> ------------------------------------------------------------------------
>> *From:* *On
>> Behalf Of *Eddie Dawydiuk
>> *Sent:* Monday, March 19, 2007 8:44 PM
>> *To:*
>> *Subject:* Re: [ts-7000] RE:TS7400 documentation
>>
>> Hello,
>>
>> >> ln -sf /linuxrc-sdroot /linuxrc; save
>> >
>> > But after reset i get
>> >
>> > Booting Linux...
>> >
>> > pivot_root: pivot_root: No such file or directory
>> >
>> > /linuxrc: 43: bin/mount: not found
>> >
>> > /linuxrc: 44: bin/mount: not found
>> >
>> > /linuxrc: 45: cannot open ./dev/ttyAM0: No such file
>> >
>> > And it stops here...
>> >
>> > Why could this be ?
>>
>> You need to upgrade the software on your TS-9441. You can find
>> information on how to accomplish this here
>> http://tech.groups.yahoo.com/group/ts-7000/message/4959
>> <http://tech.groups.yahoo.com/group/ts-7000/message/4959>
>>
>> //Eddie
>>
>
--
Per Öberg, Ph.D. Student
Address: Division of Vehicular Systems
Department of Electrical Engineering
Linköpings universitet
581 83 Linköping, SWEDEN
Phone: +46 (0)13-28 23 69
e-mail:
------------------------ Yahoo! Groups Sponsor --------------------~-->
See what's inside the new Yahoo! Groups email.
http://us.click.yahoo.com/0It09A/bOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|