I've done so w/ the ts7250, ts7260, & ts7300 boards. Works very well,
aside from the sad fact that most usb webcams go over spec and draw too
much current from the usb port on initialization. Due to this, most of
the time the boards will reboot when a webcam is connected directly.
I suggest using a usb hub with a separate power supply.
Also, keep in mind that you will have to compile the driver for your
webcam as a module (or patch it into your kernel tree) if the camera
doesn't appear in the v4l section (or usb section if it's cpia).
~/Chris
ylecun wrote:
> Has anyone tried to connect a USB webcam to a TS-7400?
>
> In particular, has anyone tested the Spca5xx-LE
> webcam driver ( http://mxhaard.free.fr/embedded.html )?
>
> -- Yann
>
>
>
------------------------ Yahoo! Groups Sponsor --------------------~-->
Great things are happening at Yahoo! Groups. See the new email design.
http://us.click.yahoo.com/lOt0.A/hOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|