--- In "captian_rm" <> wrote:
>
>
> Hi!
>
> I'm working on a TS 7200 board. I have built a 2.6.20 kernel with
> the below config. When I load it via xmodem the kernel
>
> RedBoot> load -r -v -m xmodem -b 0x00218000 vmlinuz
> CRaw file loaded 0x00218000-0x0051b6cb, assumed entry at 0x00218000
> xyzModem - CRC mode, 24686(SOH)/0(STX)/0(CAN) packets, 1 retries
>
> RedBoot> exec -c "console=ttyAM1,115200 root=/dev/hda3"
> Using base address 0x00218000 and length 0x003036cc
>
> Then it locks at this point. Here is my config
Hi Captain !
You need a few patches for modern 2.6 kernels.
http://tech.groups.yahoo.com/group/ts-7000/message/5497 is a good
place to start.
Also, I don't believe CF is working yet with 2.6. See the thread
starting at http://tech.groups.yahoo.com/group/ts-7000/message/5672
HTH ......... Charlie
PS - I found development much easier using NFS root.
------------------------ Yahoo! Groups Sponsor --------------------~-->
Something is new at Yahoo! Groups. Check out the enhanced email design.
http://us.click.yahoo.com/kOt0.A/gOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|