[ts-7000] Re: Having problems booting 2.6.20

["charliem_1216" <>]

--- In  "captian_rm" <> wrote:
>
> 
> Hi!
> 
>    I'm working on a TS 7200 board. I have built a 2.6.20 kernel with
> the below config. When I load it via xmodem the kernel 
> 
> RedBoot> load -r -v -m xmodem -b 0x00218000 vmlinuz
> CRaw file loaded 0x00218000-0x0051b6cb, assumed entry at 0x00218000
> xyzModem - CRC mode, 24686(SOH)/0(STX)/0(CAN) packets, 1 retries
> 
> RedBoot> exec -c "console=ttyAM1,115200 root=/dev/hda3"
> Using base address 0x00218000 and length 0x003036cc
> 
> Then it locks at this point. Here is my config

Hi Captain !

You need a few patches for modern 2.6 kernels.

http://tech.groups.yahoo.com/group/ts-7000/message/5497 is a good
place to start.

Also, I don't believe CF is working yet with 2.6.  See the thread
starting at http://tech.groups.yahoo.com/group/ts-7000/message/5672

HTH ......... Charlie

PS - I found development much easier using NFS root.



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Check out the new improvements in Yahoo! Groups email.
http://us.click.yahoo.com/4It09A/fOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/