ts-7000
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[ts-7000] ts 7400 USB initialization problem

from [Tuğrul GÜÇLÜ] [Permanent Link][Original]
To: <>
Subject: [ts-7000] ts 7400 USB initialization problem
From: Tuğrul GÜÇLÜ <>
Date: Tue, 13 Mar 2007 15:27:23 +0200

Hi All

 

I have connected USB disk to TS7400 board but couldn’t see anything in /dev/sda1 or anything else

Where can i locate USB?

Thanks

 

__._,_.___


SPONSORED LINKS
Single board computer Hardware Computer running slow
Linux os Single board

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [ts-7000] Re: auto login and run binaries, Per Öberg
Next by Date:  Re: [ts-7000] ts 7400 USB initialization problem, Per Ãberg
Previous by Thread:  Re: [ts-7000] Re: tslinux installation, Per Öberg
Next by Thread:  Re: [ts-7000] ts 7400 USB initialization problem, Per Ãberg
Indexes:  [Date] [Thread] [Top] [All Lists]
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU