Hello,
> I am having a problem getting the Ethernet interface to work with the SD
> distro. It works fine when booting the basic Linux image in Flash.
>
> It fails to bring up eth0 on boot and manually:
>
> :/# ifup eth0 -v
> Configuring interface eth0=eth0 (inet)
> run-parts --verbose /etc/network/if-pre-up.d
>
> pump -i eth0
> Operation failed.
> Failed to bring up eth0.
> :/#
You'll need to upgrade af_packet.o, the current driver is available here
ftp://oz.embeddedarm.com/tmp/af_packet.o.
http://tech.groups.yahoo.com/group/ts-7000/message/5640
//Eddie
------------------------ Yahoo! Groups Sponsor --------------------~-->
Yahoo! Groups gets a make over. See the new email design.
http://us.click.yahoo.com/hOt0.A/lOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|