Re: [ts-7000] opto-isolated RS232/485 for PC?

[Joe Bouchard <>]

On Wed, Feb 21, 2007 at 05:19:13PM -0000, Yan Seiner wrote:
> OK, this is slightly OT but is anyone using opto-isolated RS232 and
> RS485 PCI boards on their development PC?

Not exactly, but I can say we are using these in-line isolators on the factory
floor with good results. B&B Electronics Model 9POP4.  $79 + $15 for the wall
wart.  According to the spec they are good at 115Kbaud, although I haven't tried
it. 

http://bb-elec.com/product_family.asp?FamilyId=1&Trail=2&TrailType=Top

Good luck,
Joe


------------------------ Yahoo! Groups Sponsor --------------------~--> 
Yahoo! Groups gets a make over. See the new email design.
http://us.click.yahoo.com/hOt0.A/lOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups - Join or create groups, clubs, forums & communities. Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups - Join or create groups, clubs, forums &amp; 
communities. is subject to:
    http://docs.yahoo.com/info/terms/