Re: [ts-7000] how to make nfsroot is the default

[Christopher Friedt <>]

I noticed that nfs root wouldn't work on my board unless i also the port 
number as well (usually 2049).

try nfsroot=192.168.0.1:/home/arabian/Documents/h,port=2049

hishamelgaurf wrote:
> hi all 
> 
> i have used the command fconfig in redboot to make nfs is the default
> not the flash , i have saved new configuration then power cycled the
> board,when booted second time it get its root from flash neglecting
> what i have configured in red boot , below i have reproduced the
> output for convenince
> 
> RedBoot> fconfig
> Run script at boot: true
> Boot script:
> .. .. fis load vmlinux
> .. .. exec -c "console=ttyAM0,115200 ip=192.168.0.50
> nfsroot=192.168.0.1:/home/arabian/Documents/h"
> Enter script, terminate with empty line
>>> fis load vmlinux
>>> exec -c "console=ttyAM0,115200 ip=192.168.0.50
> nfsroot=192.168.0.1:/home/arabian/Documents/h"
> Boot script timeout (100ms resolution): 1
> Use BOOTP for network configuration: false
> Gateway IP address: 192.168.0.1
> Local IP address: 192.168.0.50
> Local IP address mask: 255.255.255.0
> Default server IP address: 192.168.0.1
> Network hardware address [MAC]: 0x00:0xD0:0x69:0x40:0x68:0x13
> GDB connection port: 9000
> Force console for special debug messages: false
> Network debug at boot time: false
> Update RedBoot non-volatile configuration - continue (y/n)? y
> RedBoot> fconfig -l
> Run script at boot: true
> Boot script:
> .. fis load vmlinux
> .. exec -c "console=ttyAM0,115200 ip=192.168.0.50
> nfsroot=192.168.0.1:/home/arabian/Documents/h"
> 
> Boot script timeout (100ms resolution): 1
> Use BOOTP for network configuration: false
> Gateway IP address: 192.168.0.1
> Local IP address: 192.168.0.50
> Local IP address mask: 255.255.255.0
> Default server IP address: 192.168.0.1
> Network hardware address [MAC]: 0x00:0xD0:0x69:0x40:0x68:0x13
> GDB connection port: 9000
> Force console for special debug messages: false
> Network debug at boot time: false
> RedBoot>
> """POWER CYCLING"""""
>>> TS-NANDBOOT, Rev 1.00 - built 10:14:31, Mar  7 2005
>>> Copyright (C) 2004, Technologic Systems
> 
> 
>>> TS-BOOTROM, Rev 1.08 - built 16:18:21, Jun  5 2006
>>> Copyright (C) 2006, Technologic Systems
>>> TS-7250: Rev E1 CPU, Rev B PLD, 32MB SDRAM
>>> TS-5620: detected, battery OK, time ( 12:01:10, Feb 10 2007 )
> 
> +Ethernet eth0: MAC address 00:d0:69:40:68:13
> IP: 192.168.0.50/255.255.255.0, Gateway: 192.168.0.1
> Default server: 192.168.0.1
> 
> RedBoot(tm) bootstrap and debug environment [ROMRAM]
> Non-certified release, version current-TS_5 - built 10:49:48, Jun 19 2006
> 
> Platform: TS-7250 Board (ARM920T) Rev A
> Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
> 
> RAM: 0x00000000-0x02000000, [0x00052ab0-0x01ff9000] available
> FLASH: 0x60000000 - 0x62000000, 2048 blocks of 0x00004000 bytes each.
> == Executing boot script in 0.100 seconds - enter ^C to abort
> RedBoot> fis load vmlinux
> RedBoot> exec -c "console=ttyAM0,115200 root=/dev/mtdblock1"
> 
> 
> 


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/