ts-7000
[Top] [All Lists]

Re: [ts-7000] Re: Wrong bootcode

To:
Subject: Re: [ts-7000] Re: Wrong bootcode
From: Curtis Monroe <>
Date: Tue, 6 Feb 2007 16:38:20 -0500
On February 6, 2007 04:21 am, wimpunk wrote:
> 
> Curtis,
> 
> I thought your patch prevented the watchdog from rebooting?
> 
> wimpunk.

The 2KB SerialBlaster bootloader disables the watchdog. But it only runs once 
the EP9302 has downloaded it. So the EP9302 needs to download it within 8 
seconds or the TW watchdog will reset the board before the 2K bootloader even 
has a chance to run.

-Curtis.



> 
> 


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU