Hamis,
I feel like an idiot, I don't get it working at my side... So I hope
you could help me out.
--- In "hamishavery" <> wrote:
>
> I managed to fix my TS7260 after vaguely following the instructions
> from Tom Hansen in message #3553. Not sure if its be best or proper
> way but it worked for me:
>
> 1) download the eeprom file for the 7260 from
>
> ftp://ftp.embeddedarm.com/images/preboot/ts7260-default
>
> 2) download the bootrom image from
>
> ftp://ftp.embeddedarm.com/images/tsbootrom/ts7260-32-default
>
> 3) download the redboot image from
>
> ftp://ftp.embeddedarm.com/images/redboot/ts7260-32-kernel
>
> 4) compile serial_blaster_1.0 as per instructions and run it
Did you used ecos to compile your redboot.bin or did you used the
redboot image you downloaded?
When running serial_blaster I get this after writing boot.bin:
2048 Bytes in 17 seconds.
--------------------------------------------------
waiting for '>'
ERROR!!! Expected '>' but found '<'
Any suggestions?
wimpunk
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|