--- In Curtis Monroe <> wrote:
>
> On February 5, 2007 02:07 pm, wimpunk wrote:
> > Hamis,
> >
> > I feel like an idiot, I don't get it working at my side... So I hope
> > you could help me out.
> >
> > --- In "hamishavery" <hamishavery@> wrote:
> > >
> > > I managed to fix my TS7260 after vaguely following the instructions
> > > from Tom Hansen in message #3553. Not sure if its be best or
proper
> > > way but it worked for me:
> > >
> > > 1) download the eeprom file for the 7260 from
> > >
> > > ftp://ftp.embeddedarm.com/images/preboot/ts7260-default
> > >
> > > 2) download the bootrom image from
> > >
> > > ftp://ftp.embeddedarm.com/images/tsbootrom/ts7260-32-default
> > >
> > > 3) download the redboot image from
> > >
> > > ftp://ftp.embeddedarm.com/images/redboot/ts7260-32-kernel
> > >
> > > 4) compile serial_blaster_1.0 as per instructions and run it
> >
> > Did you used ecos to compile your redboot.bin or did you used the
> > redboot image you downloaded?
> > When running serial_blaster I get this after writing boot.bin:
> >
> > 2048 Bytes in 17 seconds.
>
> 17 seconds? the TS watchdog will reset the board in 8 seconds. Each
time the
> board resets it sends '<' to request the 2K boot image from the host.
>
> It looks like your host system is too slow.
>
> Some people made suggestions on the list to speed up transfers on
slow host
> systems. It involves not flushing the serial on the host so often.
This means
> the host will not report the transfer progress as accurately, but
slower
> hosts can still boot a board within the 8 seconds before the TS WD
reset.
>
> -Curtis.
>
Curtis,
I thought your patch prevented the watchdog from rebooting?
wimpunk.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|