Hello,
>>> I'm pretty sorry to report, but we did removed the JP3.
>>
>> So JP3 is removed and the board is still going to low power mode as soon
>> as you remove the power?
>>
>> //Eddie
>>
>
> As far as I can see, the board just stops working. After putting back
> the power, the board reboots.
When you are charging the board did you specify the sleep command?
If not what command did you enter to charge the batteries? FYI
you can put a jumper on the proper pins of the ISP header to wake
the bat3 from sleep mode, this is documented in the TS-BAT3 manual.
http://www.embeddedarm.com/Manuals/ts-bat3-info.txt
//Eddie
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|