[ts-7000] interrupt ts-7400 boot

To:
Subject:	[ts-7000] interrupt ts-7400 boot
From:	"atelierrobin" <>
Date:	Thu, 01 Feb 2007 00:00:54 -0000

Hello,

I cannot interrupt the boot process on the ts-7400 with ctrl-c. I
tried both hyperterm and teraterm with hard and soft flow control
disabled.

The only message I get when booting is:

>> TS-FLASHBOOT - built Sep 27 2006
>> Copyright (c) 2006, Technologic Systems
.
.
.
Finished booting in 1.14 seconds
Type 'tshelp' for help

Am I doing something wrong?

Thank You

Patrick Robin



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] interrupt ts-7400 boot, atelierrobin <= Re: [ts-7000] interrupt ts-7400 boot, Bas Schulte Re: [ts-7000] interrupt ts-7400 boot, Eddie Dawydiuk

Previous by Date:	[ts-7000] serial_blaster + TS-7250, gkwicker
Next by Date:	[ts-7000] real time (RTAI) extension for Debian, atelierrobin
Previous by Thread:	[ts-7000] serial_blaster + TS-7250, gkwicker
Next by Thread:	Re: [ts-7000] interrupt ts-7400 boot, Bas Schulte
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU