Re: [ts-7000] interrupt ts-7400 boot

[Bas Schulte <>]

On 1-feb-2007, at 1:00, atelierrobin wrote:

I cannot interrupt the boot process on the ts-7400 with ctrl-c. I
tried both hyperterm and teraterm with hard and soft flow control
disabled.

The only message I get when booting is:

>> TS-FLASHBOOT - built Sep 27 2006
>> Copyright (c) 2006, Technologic Systems.
.
.
Finished booting in 1.14 seconds
Type 'tshelp' for help

Am I doing something wrong?

It boots so fast it's hard to interrupt it ;)

Seriously though, why do you want to interrupt it? Either you get the ts-fastboot prompt (as per the above) or it boots to the root partition is specified in linuxrc. If you create an empty file on that root partition called 'fastboot' it'll drop you into the ts-fastboot prompt again.

I think the whole stuff about pressing ctrl-c to interrupt boot isn't applicable to the ts-7400 as it doesn't use RedBoot.

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___