...
>
> It's strange, the two files look almost the same, except for the
> additional EEC code and a more verbose kernel logging. Furthermore,
> /mtd/nand/ts7250.c seems newer than /mtd2k/nand/ts7250.c. When I load
> the standard kernel, I see in the kernel log the data printed by the
> mtd2k module, this confuses me... ?!?
>
> Can someone explain to me the difference between the two modules?
> Which one is the one that is actually used and able to see the NAND Flash?
>
> Thanks a lot
> Andrea
>
The mtd module supports 512 byte sector flash, while the mtd2k module
supports 2048 byte sector flash. The additional ECC code is for when the
hardware (in the FPGA) provides hardware accelerated ECC computation.
Regards,
Michael
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|