ts-7000
[Top] [All Lists]

[ts-7000] NewBie Need Help on mounting file system for ts7200 on labtop

To:
Subject: [ts-7000] NewBie Need Help on mounting file system for ts7200 on labtop by NFS
From: "chan8337" <>
Date: Sat, 06 Jan 2007 08:18:13 -0000
Hi to all experts out there, 

I requires to setup a NFS for my labtop in order for the ts-7200 to boot. 

For your guys info i am using the ubuntu linux Edgy version. I have
installed the portmap and the nfs deamon. I have tested with another
linux another pc where i can mount the NFS with the mount command. But
when i boot the ts-7200 i just cant make it. Oh ya i am using a D-Link
switch to link the board to my pc.

i set my pc ip address to 10.1.136.171 and the board with 10.1.136.170

My portmap setting:
--------------------
OPTIONS="nolock"

the exports file setting:
-------------------------
/home/administrator/nfsroot/
10.1.136.1/255.255.252.0(rw,no_root_squash,insecure,sync)


I followed the setup prcedure from the arms documents but i end up
with this thing:

---------------------------------------------------------------------
== Executing boot script in 0.100 seconds - enter ^C to abort
RedBoot> fis load vmlinux.bin
RedBoot> exec -c "console=ttyAM0,115200 ip=10.1.136.170
nfsroot=10.1.136.171:/home/administrator/nfsroot"
Using base address 0x00218000 and length 0x00160000
Linux version 2.4.26-ts9  (gcc version 3.3.4) #1 Tue
Oct 25 15:30:14 MST 2005
CPU: Arm920Tid(wb) revision 0
Machine: ep9301
On node 0 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 1 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 2 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 3 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyAM0,115200 ip=10.1.136.170
nfsroot=10.1.136.171:/home/administrator/nfsroot
Console: colour dummy device 80x30
Calibrating delay loop... 99.94 BogoMIPS
Memory: 8MB 8MB 8MB 8MB = 32MB total
Memory: 28524KB available (1303K code, 343K data, 72K init)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
CPU: Testing write buffer: pass
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch 
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
ttyAM0 at MMIO 0x808c0000 (irq = 52) is a AMBA
ttyAM1 at MMIO 0x808d0000 (irq = 54) is a AMBA
ttyAM2 at MMIO 0x808e0000 (irq = 55) is a AMBA
pty: 1024 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ enabled
rtc: no TS-5620 RTC detected.
ep93xx_eth() version: ep93xx_eth.c: V1.0 09/04/2003 Cirrus Logic
about to do sbc_setinfo
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with
idebus=xx
Technologic Systems TS-7XXX IDE initialization - driver version 1.3,
6/21/04. 
TS-7200 flash: Found 1 x16 devices at 0x0 in 16-bit bank
 Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Creating 3 MTD partitions on "TS-7200 flash":
0x00000000-0x00020000 : "TS-BOOTROM"
0x00020000-0x00620000 : "Linux"
0x00620000-0x00800000 : "RedBoot"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
enable_irq(39) unbalanced from c02d18f0
IP-Config: Guessing netmask 255.0.0.0
IP-Config: Complete:
      device=eth0, addr=10.1.136.170, mask=255.0.0.0, gw=255.255.255.255,
     host=10.1.136.170, domain=, nis-domain=(none),
     bootserver=255.255.255.255, rootserver=10.1.136.171, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.97 (double precision)
Looking up port of RPC 100003/2 on 10.1.136.171
Looking up port of RPC 100005/1 on 10.1.136.171
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing init memory: 72K
INIT: version 2.85-ts1.00 booting

http://www.embeddedarm.com
email:

devfsd v1.3.25  started for /dev
now mounting /proc
mounting local filesystems (in fstab)
sdcard0: Technologic Systems SD card controller, address 0x13000000
sdcard0: no SD card option present on this board
INIT: Entering runlevel: 3
Setting hostname....
nfs warning: mount version older than kernel
NFS: mount program didn't pass remote address!
Bringing up interface eth0..
Bringing up interface eth0..
RPC: sendmsg returned error 101
nfs: RPC call returned error 101
.: 10: Can't open /etc/sysconfig/ifcfg-lo
RPC: sendmsg returned error 101
nfs: RPC call returned error 101
RPC: sendmsg returned error 101
nfs: RPC call returned error 101
/etc/rc.d/rcS: 47: test: Network is unreachable
RPC: sendmsg returned error 101
nfs: RPC call returned error 101
/etc/rc.d/rcS: 47: /etc/rc.d/rc3.d/S11portmap: Network is
unreachablRPC: sendmsg returned error 101
e
nfs: RPC call returned error 101
RPC: sendmsg returned error 101
nfs: RPC call returned error 101
/etc/rc.d/rcS: 47: test: Network is unreachable
RPC: sendmsg returned error 101
nfs: RPC call returned error 101
RPC: sendmsg returned error 101
nfs: RPC call returned error 101
RPC: sendmsg returned error 101
nfs: RPC call returned error 101
RPC: sendmsg returned error 1013.d/S20inetd: Network is unreachable

nfs: RPC call returned error 101
/etc/rc.d/rcS: 47: test: Network is unreachable
RPC: sendmsg returned error 101
nfs: RPC call returned error 101
/etc/rc.d/rcS: 47: /etc/rc.d/rc3.d/S30telnetd: Network is
unreachablRPC: sendmsg returned error 101
e
nfs: RPC call returned error 101
/etc/rc.d/rcS: 47: test: Network is unreachable
RPC: sendmsg returned error 101
nfs: RPC call returned error 101
/etc/rc.d/rcS: 47: /etc/rc.d/rc3.d/S40apache: Network is
unreachableRPC: sendmsg returned error 101

nfs: RPC call returned error 101
/etc/rc.d/rcS: 47: test: Network is unreachable
RPC: sendmsg returned error 101
nfs: RPC call returned error 101
/etc/rc.d/rcS: 47: /etc/rc.d/rc3.d/S80tsuart: Network is
unreachableRPC: sendmsg returned error 101

nfs: RPC call returned error 101
/etc/rc.d/rcS: 47: test: Network is unreachable
RPC: sendmsg returned error 101
nfs: RPC call returned error 101
/etc/rc.d/rcS: 47: /etc/rc.d/rc3.d/S90ts7kvfb: Network is unreachable
----------------------------------------------------------------------





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU