[ts-7000] 7260 Serial BREAK issues with tcsendbreak

["lairlab" <>]

Working with the TS-7260 and a serial device which requires a serial break sent 
on the port 
to reset the device any time after initial power on reset.  There seems to be 
no problem with 
any of the communication after power on reset, but it appears that the 
implementation of the 
serial driver on the EP3901 does not send a serial break using the linux 
command 
tcsendbreak(fd,0).

Is this the confirmed by others?



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/