Hi --
--- In Jim Jackson <> wrote:
>
>
> On Sat, 6 Jan 2007, chan8337 wrote:
>
> > Hi to all experts out there,
> >
> > I requires to setup a NFS for my labtop in order for the ts-7200
to boot.
> >
> > For your guys info i am using the ubuntu linux Edgy version. I have
> > installed the portmap and the nfs deamon. I have tested with another
> > linux another pc where i can mount the NFS with the mount command. But
> > when i boot the ts-7200 i just cant make it. Oh ya i am using a D-Link
> > switch to link the board to my pc.
> >
> > i set my pc ip address to 10.1.136.171 and the board with 10.1.136.170
>
> I think your NFS is working fine as your output indicates.
> However it does look like your network configuration on the NFS root
> image is wrong. When the init sequence initialised the network
> it started going wrong - see the errors really start after the line...
>
> > Bringing up interface eth0..
>
> Jim
Right. NewBie (Chan?), check your network settings in your NFS image
(ip address & netmask). Also, it looks like the scripts are trying to
bring up eth0 twice. Why?
A few other things to try:
* Add 'root=/dev/nfs' to the boot command line. I found that this was
needed in addition to the 'nfsroot= ...'.
* Check the ip address that you have configured in RedBoot and try
setting it to what you pass on the command line. Do any of the TS
scripts try to determine (and use) the ip address from RedBoot?
Regards, ....... Charlie
>
>
> >
> > My portmap setting:
> > --------------------
> > OPTIONS="nolock"
> >
> > the exports file setting:
> > -------------------------
> > /home/administrator/nfsroot/
> > 10.1.136.1/255.255.252.0(rw,no_root_squash,insecure,sync)
> >
> >
> > I followed the setup prcedure from the arms documents but i end up
> > with this thing:
> >
> > ---------------------------------------------------------------------
> > == Executing boot script in 0.100 seconds - enter ^C to abort
> > RedBoot> fis load vmlinux.bin
> > RedBoot> exec -c "console=ttyAM0,115200 ip=10.1.136.170
> > nfsroot=10.1.136.171:/home/administrator/nfsroot"
> > Using base address 0x00218000 and length 0x00160000
> > Linux version 2.4.26-ts9 (gcc version 3.3.4) #1 Tue
> >
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|