Re: [ts-7000] TS-7300 eth0 not able to init using dhcp

To:
Subject:	Re: [ts-7000] TS-7300 eth0 not able to init using dhcp
From:	Eddie Dawydiuk <>
Date:	Thu, 4 Jan 2007 15:22:34 -0700 (MST)

Hello,

> There is not much else that I can figure out.  When I try to ifup eth0
> on the dhcp, the system just hangs (same when I try and boot dhcp).

Even if there is no dhcp server the system shouldn't hang. Can you post
your boot messages, as well as the command you enter to configure eth0
resulting in a system hang.

//Eddie


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] TS-7300 eth0 not able to init using dhcp, paley Re: [ts-7000] TS-7300 eth0 not able to init using dhcp, Eddie Dawydiuk <=

Previous by Date:	Re: [ts-7000] problems installing fastboot, Eddie Dawydiuk
Next by Date:	[ts-7000] Re: Interrupting RedBoot - How?, tyerslockandblock
Previous by Thread:	[ts-7000] TS-7300 eth0 not able to init using dhcp, paley
Next by Thread:	[ts-7000] CMOS..Sensor Interfacing..TS7250, Laks
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU