[ts-7000] TS-7300 eth0 not able to init using dhcp

["paley" <>]

Overall I've pretty much got my system up and running, however, one
sticky point remains... eth0 will not init using dhcp.

I've been able to see the system via ethernet by using a static ip
(both at home and the office) using 192.168.1.60 (my home ip).   Both
networks are setup correctly (multiple Linux and Windows machines) all
working correctly.

There is not much else that I can figure out.  When I try to ifup eth0
on the dhcp, the system just hangs (same when I try and boot dhcp).

any suggestions?
--Daniel



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/