[ts-7000] Re: 2.6.19 on TS7400 w/64mb ram

["Andrea Martino" <>]

--- In  "Breton M. Saunders"
<> wrote:
>
> Folks,
> 
>   I've put some patches together to run 2.6.19 on a TS7400 w/64MiB
ram - 
> the 8 banks by 8MiB version.  The patches are assembled from M.
Burian's 
> tree, and seems to boot just fine on my TS7400.
> 
>   Find the patches at: http://www.mynah-software.com/arm/
> 
>     Have Fun,
> 
>        -Brett
>

Hi Breton,
thanks for the post, there are a lot of people interested in putting
the 2.6 kernel into the ts7400 ;-)

For which kernel release does your config/patch work? The official
vanilla kernel or an already patched one? Where did you take it?

Furthermore, I found lots of example on how to replace the kernel
using redboot for the 72xx and 73xx boards, but not for the 7400.
What's the easiest way for replacing the kernel for the ts7400?

Thanks a lot
Bye
Andrea



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/