Brenton,
Thanks for the patches! Between what you have and what I had already
dug through I was able to get this working on the TS-7260 also (minor
changes). I think my changes will also allow TS-7250 to work as well.
For those interested, I am going to clean up what I have and post a
patch + .config for the TS-7260. I should be able to do this in a
couple of days and I will put it in the files section of the yahoo
group.
One bug I found so far is the show_mem function triggered by sysrq-m
hits an oops. Can you try this on your TS7400:
echo m > /proc/sysrq-trigger
and let me know if you get an oops? Might be related to the changes I
made.
- Doug
--- "Breton M. Saunders" <> wrote:
> Folks,
>
> I've put some patches together to run 2.6.19 on a TS7400 w/64MiB
> ram -
> the 8 banks by 8MiB version. The patches are assembled from M.
> Burian's
> tree, and seems to boot just fine on my TS7400.
>
> Find the patches at: http://www.mynah-software.com/arm/
>
> Have Fun,
>
> -Brett
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|