| To: | |
|---|---|
| Subject: | Re: [ts-7000] LCDProc on TS-7250 |
| From: | Eddie Dawydiuk <> |
| Date: | Tue, 2 Jan 2007 08:58:12 -0700 (MST) |
Hello,
> I'm trying to get LCDProc to run on the TS-7250. I've followed the
> instructions in "Using LCDproc with Technologic Systems SBC" and I have
> LCDd running with no errors. When I try to connect using telnet
> (127.0.0.1 13666) the TS-7250 refuses the connection. I've also tried
> enabling the messages from the LCDd.conf but I do not see any messages.
>
> Any suggestions?
That document was written for Technologic's x86 based SBCs.
//Eddie
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] redboot.bin image for ts7260, Doug Chapman |
|---|---|
| Next by Date: | Re: [ts-7000] Re: Thoughts on the new TS-7400 board, Paulo Marques |
| Previous by Thread: | [ts-7000] TS7250 unable to boot with temp-sensor in COM1, Per Öberg |
| Next by Thread: | [ts-7000] TS-7300 opencore wishbone data corruption, fpga_test_dev |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU