No I haven't, that's most certainly the problem.
I will try it as soon as possible.
Tanks!
Per Öberg
Per Jonsson wrote:
> Have you changed the console arguments for the Linux kernel into something
> sensible?
>
> /poj
>
> On Tue, Jan 02, 2007 at 10:31:02AM +0100, Per Öberg wrote:
>> Hi everyone!
>>
>> I have a TS7250 with a homebuilt temp-sensor for the serial port. My
>> problem is that I am unable to boot the TS-7250 while the temp-sensor is
>> connected. If I connect the sensor and try to boot the board, the boot
>> process will halt somewhere and not continue until I disconnect the
>> sensor. After the boot is finished i can connect the sensor and
>> everything will be working fine, regardless of what I did with the
>> com-port during the boot.
>>
>> I have removed JP2 to disable the redboot console and I have edited
>> inittab to disble getty on com-1 but it still doesn'r work. When the
>> boot process has hung it is possible to ping the board but not connect
>> to it via ssh. (I'm using NFS-boot)
>>
>> What else can i try?
>>
>> Regards Per Öberg
>>
>> --
>> Per Öberg, Ph.D. Student
>> Address: Division of Vehicular Systems
>> Department of Electrical Engineering
>> Linköpings universitet
>> 581 83 Linköping, SWEDEN
>> Phone: +46 (0)13-28 23 69
>> e-mail:
--
Per Öberg, Ph.D. Student
Address: Division of Vehicular Systems
Department of Electrical Engineering
Linköpings universitet
581 83 Linköping, SWEDEN
Phone: +46 (0)13-28 23 69
e-mail:
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|