Everythinks is ok with Quartus 6.1,
Thanks Andrew.
Bulent
--- In "aqueisser" <> wrote:
>
> --- In "bulent.selek" <bulent.selek@>
> wrote:
> >
> > Hello,
> > I have a problem with ts7300's fpga ( cyclone II ) device.
> > I wrote a small core with vhdl and synthesis the core with Quartus II
> > 6.0sp and converted it raw binary file ( rtf ).
> > When i tried to download the code to fpga, the system ( EP902, linux
> > side ) halted and there is no response fpga's io pins as i expected,
> > then I downloaded ts7300_opencore from opencores and successfully
> > synthesis with Quartus. System halted again :(
> > I don't have any idea about what is wrong.
> > Is any one have an example code that can work.
> >
> > Regards,
> > Bulent Selek.
> >
>
> Bulent, I too have not had success with Quartus 6.0 so far but the
> current web edition from the Altera website works fine. 2 minutes ago
> 6.1 arrived at my desk so I'll give that a try soon.
>
> If you have a second computer available I'd recommend giving the web
> edition a try and see if that's your problem. I found that just
> rebuilding the unmodified ts7300_opencore on Q6 didn't work so your
> problem might very well be related to the Altera tools.
>
> Andrew
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|