[ts-7000] ts7300 and cyclone 2

["bulent.selek" <>]

Hello, 
I have a problem with ts7300's fpga ( cyclone II ) device.
I wrote a small core with vhdl and synthesis the core with Quartus II
6.0sp and converted it raw binary file ( rtf ).
When i tried to download the code to fpga, the system ( EP902, linux
side ) halted and there is no response fpga's io pins as i expected, 
then I downloaded ts7300_opencore from opencores and successfully
synthesis with Quartus. System halted again :(
I don't have any idea about what is wrong.
Is any one have an example code that can work.

Regards,
Bulent Selek.





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/