James,
All I did to use the 800x600 was:
rename the TS7300_cyclone2.rbf in the full debian's /boot directory
to TS7300_cyclone2_640x480.rbf then copied in the new
TS7300_cyclone2_800x600.rbf which I then copied to TS7300_cyclone2.rbf
This would allow me to copy either of the two versions to
TS7300_cyclone2.rbf when switching resolutions (not that I plan to
switch back).
I then mounted the read only boot partition to a previously created
mount directory:
mount -t ext2 /dev/sdcard0/disc0/part2 /mnt/pjerd
I could then copy the ts7300fb-800x600.o to the newly mounted
directory and perform the same operation (cp ts7300fb.o to ts7300fb-
640x480.o and then cp ts7300fb-800x600.o ts7300fb.o).
When I rebooted everything came up fine - apart from the Technologic
Systems Graphic, which is currently set up for 640x480 mode.
I've not tried the transparent blit functions as I'm too busy
converting my program to use the new space ;-)
On issue Jesse is still working on is finalizing the timing specs as
the original pre-release only filled 790 of the 800 horizontal pixels
of the industrial 10.4" touch monitor. Hopefully the newer release
will improve this last issue. The initial release doesn't display on
a cheap 15" LCD I use for development at home while the new release
works...
Hope this helps,
PJE
--- In "gamehoser" <> wrote:
>
> That is FANTASTIC news. I'll have to start reading up on what it'll
> take for me to try this out. Thanks Jesse and thanks again Pete for
> funding something that I'm sure will benefit many people in this
group.
>
> James
>
> --- In "Jesse Off" <joff@> wrote:
> >
> > --- In "gamehoser" <james.singer1@>
wrote:
> > >
> > > Were any features from the standard FPGA bitstream removed?
> >
> > No. I believe it even compiled smaller than the original.
> >
> > //Jesse Off
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|