Hi,
> We added support for handling bad blocks to RedBoot a while back. If you
> look in ftp://ftp.embeddedarm.com/images/redboot
<ftp://ftp.embeddedarm.com/images/redboot> you should find the redboot
> image you need. If you have an older board with 512 byte blocks you will
> want to look for something like "ts7250-128-kernel-ts11" while if you
have a
> newer 2k byte block size you will want a filename containing "nand2k"
> (though in this case you should have a new enough version to not need to
> download it...
I have a TS-7250 with 2 bad blocks in the redboot partition. When I try
to write the kernel image ("fis create" command) it fails, because there
are some bad blocks. It seems that my redboot isn't able to skip bad
blocks, even if you say that it should.
Can you give more information, please?
How can I skip bad blocks?
---
RedBoot> fis list
Name FLASH addr Mem addr Length Entry point
(reserved) 0x60000000 0x60000000 0x01D04000 0x00000000
RedBoot 0x61D04000 0x61D04000 0x00040000 0x00000000
vmlinux 0x61D44000 0x00218000 0x00128000 0x00218000
(bad block) 0x61E44000 0x61E44000 0x00004000 0xFFFFFFFF
(bad block) 0x61F80000 0x61F80000 0x00004000 0xFFFFFFFF
FIS directory 0x61FFC000 0x61FFC000 0x00003000 0x00000000
RedBoot config 0x61FFF000 0x61FFF000 0x00001000 0x00000000
---
---
RedBoot> version
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version current-TS_5 - built 10:49:48, Jun 19 2006
---
Thanks,
Marco Pracucci
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|