I would appreciate an example how to do this. Thank you so much.
--- In "Don W. Carr" <> wrote:
>
> It is already done for you, and the drivers should already be
installed. The
> UARTs are implemented in the FPGA and have transmit and receive buffers.
> There may be one or two of the first com ports that are implemented
in the
> Cirrus SOC chip with the Arm processor, I am not sure there. But, in any
> case, it is all handled for you. I can give some example serial port
code if
> you are interested. Don.
>
> On 12/4/06, sipnj <> wrote:
> >
> > I would like to create an application to receive data on a COM
port by
> > using interrupts instead of polling. Is there some documentation how
> > this might be done? Also, where can I get detailed specs of the UARTs?
> >
> > Thanks
> >
> >
> >
>
>
>
> --
> Dr. Don W. Carr
> J. G. Montenegro 2258
> Guadalajara, Mexico
> +52-333-630-0704
> +52-333-836-4500 ext 2930
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|