[ts-7000] TS7300 and 4 x 20 LCD

To:
Subject:	[ts-7000] TS7300 and 4 x 20 LCD
From:	"pa_ie2000" <>
Date:	Mon, 04 Dec 2006 16:11:55 -0000

Can anyone give me advice on how I modify the example lcdmesg.c code to talk to a Powertip 20 char x 4 line display?

Right-click and save as. (I've had difficulty opening it in my browser).

Regards, Paul

__._,_.___

SPONSORED LINKS

`Single board computer`	`Hardware`	`Computer running slow`
`Linux os`	`Single board`

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] TS7300 and 4 x 20 LCD, pa_ie2000 <=

Previous by Date:	[ts-7000] Re: Frame Buffer Programming ?, gamehoser
Next by Date:	[ts-7000] Matrix keypad with cable OP-KPAD - TS-7300, Rafael_Sotomayor
Previous by Thread:	[ts-7000] Serial COM RS232 Port Interrupts on TS7300, sipnj
Next by Thread:	[ts-7000] Matrix keypad with cable OP-KPAD - TS-7300, Rafael_Sotomayor
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU