Re: [ts-7000] Pics of 34 serial ports on a TS-7300

["Don W. Carr" <>]

Also, the TS-7300 (or other models) would make great Modbos TCP/IP to Modbus serial bridges. I have the software to do that, but need to put some finishing touches on it.

The TS-7400 (or other models) could also be used to cheaply extend network access to a remote location over 1 km, via PPP over full duplex RS-485, or even via wireless using the Maxstream XBeePro that will allow you to extend your network one mile (line of sight outside), again using PPP. Of course would not be very high bandwidth, you need one TS-7400 on each end.

Don.

On 12/1/06, Jesse Off <> wrote:

We've just designed a TS-7300 FPGA load with 34 RS232 serial ports.
We were only able to bring out 25 in the enclosure pictured below.
There is up to three serial ports in each of the 8 DB9's at the top of
the enclosure.

http://www.embeddedarm.com/~joff/34comm-stcllw.jpg

Ridiculous huh? :-)

//Jesse Off

-- 
Dr. Don W. Carr
J. G. Montenegro 2258
Guadalajara, Mexico
+52-333-630-0704
+52-333-836-4500 ext 2930

__._,_.___

SPONSORED LINKS

Single board computer	Hardware	Computer running slow
Linux os	Single board

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___