Re: [ts-7000] Re: Pics of 34 serial ports on a TS-7300

["Don W. Carr" <>]

Ok, I would be interested to take a look at your code to compare how you did it. I have been wanting to get back and clean up my code and make a gateway for some time now. We should help out TS and have a gateway so that it would be easy to implement a modbus gateway on their hardware. I have had my code up and running for long periods of times talking to other implementations of Modbus, such as Sixnet RTUs and Siemens PLC through a Sixnet bridge. My code is based on a project to translate HP-RTU protocol to Modbus to connect an existing SCADA system to a GE RTU because the vender would not do a driver for them. That ran for over 5 years before they replaced the SCADA system. I wrote a Modbus server for testing that.

Don.

On 12/1/06, Yan Seiner <> wrote:

--- In ts-7000%40yahoogroups.com, "Don W. Carr" <> wrote:
>
> Also, the TS-7300 (or other models) would make great Modbos TCP/IP
to Modbus
> serial bridges. I have the software to do that, but need to put some
> finishing touches on it.

Don:

I just got mine done as well. I have a Modbus TCP server to Modbus
RTU master gateway.

I will post my code Monday; I really need a reality check on my code
and I think it would be great to have another open source
implementation to check against.

I've tried checking with closed-source utilities but the checks are of
limited value as I don't know what they are doing....

--Yan

-- 
Dr. Don W. Carr
J. G. Montenegro 2258
Guadalajara, Mexico
+52-333-630-0704
+52-333-836-4500 ext 2930

__._,_.___

SPONSORED LINKS

Single board computer	Hardware	Computer running slow
Linux os	Single board

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___