Hi,
I'm trying to get a TS-BAT3 up and running on a TS-7260. As you could
guess, it doesn't work as expected. I used
ftp://oz.embeddedarm.com/bat3/UserManual.txt as documentation and did
folowing steps:
1. With all power disconnected, plug the TS-BAT3 board into the main
board.
This was the easiest part
2. Download and install the lastest drivers and application software.
How can I install software with all power disconnected? I decided to
switch 1. and 2.: first installed all software, second plugged in the
TS-BAT3 board
3. Connect an appropriate power supply to the TS-BAT3 board.
I connected 24V DC via the square connector
4. Remove the "BATTERY DISABLE" jumper. (JP3)
Pretty easy.
5. Power up or reboot the main board.
I expected the original 24V being enough. Do I have to connect the
TS-BAT3 to the main board? I expected the mainboard to be powered by
the TS-BAT3 but nothing happens.
Is there anyone in this list who could help me powering up my board
using the TS-BAT3?
Tnx,
wimpunk.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|