I found the problem and fixed it.
The power feeding the sbc enclosure was 5 vdc and needed to
be from 8 to 38 vdc...
--- In "yur_gramps" <> wrote:
>
> When I power up my ts7250 here is what I see on minicom console:
> /***
>
> >>TS-NANDBOOT, Rev 1.01 -built 10:30:52 , DEC 20 2005
> >>Copyright (C) 2005 , Technologic Systems
>
> >>TS-BOOTROM , Rev 1.08 -built 10:40:29 , JUN 12 2006
>
>
>
> ***/
>
> It repeats the above three or so times and stops...
> Pressing ctrl C does nothing.
> Minicom configured for 115200 8N1
> Jtag Jumpers 2 and 3 are on (came that way)
> the board leds are both on (green and red) steady.
>
> I have a TS9420 but no instructions came with it
> (what dip pins to enable on the 9420, what Jumpers to set on the
> TS-7250) and nothing on the embedded.com website helped(that I saw).
>
>
> Note:
> This is the first time I booted this ts-7250 -it is new and in its own
> case. Ordered it 3 along with the ts-9420 months ago but just now have
> time to look at it.
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|