ts-7000
[Top] [All Lists]

Re: [ts-7000] Problems booting ts7300?

To:
Subject: Re: [ts-7000] Problems booting ts7300?
From: "Alvaro Aguirre" <>
Date: Fri, 27 Oct 2006 12:11:07 -0300
dd it to /dev/sde, not /dev/sde1

dd if=fastboot-7300-sdcard-7-6-2006.dd of=/dev/sde

good luck!
Alvaro

On 10/27/06, andygryc <> wrote:

Hi all,
I've just got a new ts7300. I'm familiar with the ts7250 (we have a
new product that includes it), but I'm just started trying to make the
SD flash for a boot image.

I've downloaded the fast boot image, and I think I've put it on a
card. It's a 256MB card as suggested in the instructions, and the
card compares properly (at least for the first piece of it).

~]# dd if=fastboot-7300-sdcard-7-6-2006.dd of=/dev/sde1
488448+0 records in
488448+0 records out
~]# dd if=/dev/sde1 of=compare.dd
499611+0 records in
499611+0 records out
~]# ls
-rw-r--r-- 1 andy andy 255800832 Oct 26 23:28 compare.dd
-rw-rw-r-- 1 andy andy 250085376 Oct 26 23:11
fastboot-7300-sdcard-7-6-2006.dd
~]# cmp compare.dd fastboot-7300-sdcard-7-6-2006.dd
cmp: EOF on fastboot-7300-sdcard-7-6-2006.dd

Notice that the card is slightly bigger than the fastboot image--don't
know if that's causing a problem or not.

I put the SD card in the left slot (between the jumper and the power
blocks). I think this is the correct slot (although I've tried both).

However, I get no sign of recognition from the TS-SDBOOT; I just get
the boot message over and over again, so it clearly isn't recognizing
the image.

I'm using the SanDisk ImageMate 5-in-1 reader (SDDR-99 v4), which I
load via "/sbin/modprobe usb-storage" to create the /dev/sde1 device
on my system. I know that this is the right device, because 1) it
doesn't appear unless the SD is plugged into the SanDisk reader, and
2) it blinks red when I read/write the card with dd.

Any thoughts as to what to do next to diagnose the problem?
--Andy Gryc
Airchitex, Inc.


__._,_.___


SPONSORED LINKS
Single board computer Hardware Computer running slow
Linux os Single board

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU