Hello,
>>> sdcard0: Technologic Systems SD card controller, address 0x13000000
>>> sdcard0: no SD card option present on this board
>>
>> It looks like the SD card driver attempted to load but didn't detect an
>> SD card present.
Sorry I must have misread this error message the first time. This error
message is stating that the CPLD on the TS-7260 hasn't been programmed
with the SD card option.
> On the 7400 I can boot to
> the TS SD card but not without errors such as the ones listed below. I
> tried to boot to the card with the write protect switch in both
> positions.
The errors listed may be caused by the SD card being write protected or
if the filesystem is mounted read only.
> Partial dmesg output from TS-7400 SD card boot:
>
> rm: cannot remove `/tmp/.clean': Input/output error
> /etc/init.d/rcS: line 39: /tmp/.clean: cannot overwrite existing file
> can't create lock file /etc/mtab~150: Input/output error (use -n flag
> to overrid
> e)
> can't create lock file /etc/mtab~159: Input/output error (use -n flag
> to overrid
> e)
> can't create lock file /etc/mtab~163: Input/output error (use -n flag
> to overrid
> e)
//Eddie
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|