| To: | |
|---|---|
| Subject: | [ts-7000] Re: how do I mount the USB flash disk? |
| From: | "raratex" <> |
| Date: | Tue, 10 Oct 2006 08:51:07 -0000 |
Hello everybody,
I have no loadUSBModules.sh in /usr/bin ! I have purchased
standard "development" 512MB SD card with TSLinux (+TS7300). What's
wrong?
Thanks for reply,
RR
--- In "skyking_ptd" <> wrote:
> >
> Page 20 of the 'Linux for ARM on TS-7000' explains it.
> Basically:
> run /usr/bin/loadUSBModules.sh then
>
> HTH
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] How do I wire the SBC, kvnherrera |
|---|---|
| Next by Date: | [ts-7000] 2.6.18 hangs on reboot, Marco Pracucci |
| Previous by Thread: | [ts-7000] Re: how do I mount the USB flash disk?, skyking_ptd |
| Next by Thread: | Re: [ts-7000] Re: how do I mount the USB flash disk?, Eddie Dawydiuk |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU