| To: | |
|---|---|
| Subject: | [ts-7000] Re: how do I mount the USB flash disk? |
| From: | "skyking_ptd" <> |
| Date: | Wed, 04 Oct 2006 22:40:36 -0000 |
--- In "pat22043" <> wrote:
>
> I've just got a 7250 with developers' kit.
> I can't see any files on the thumb drive.
>
> I've started
> loadUSBModules.sh
>
> What else do I have to do?
>
> And any pointers to the documentation so I can RTFM would be
appreciated.
>
> Thanks
>
Page 20 of the 'Linux for ARM on TS-7000' explains it.
Basically:
run /usr/bin/loadUSBModules.sh then
mount /dev/scsi/host0/bus0/target0/lun0/part1 /mnt/(whatever)
HTH
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] Re: USB Problem, chentom60 |
|---|---|
| Next by Date: | [ts-7000] Re: USB Problem, Yan Seiner |
| Previous by Thread: | Re: [ts-7000] how do I mount the USB flash disk?, Jim Jackson |
| Next by Thread: | [ts-7000] Re: how do I mount the USB flash disk?, raratex |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU