| To: | TS-7200 Mailing List <> |
|---|---|
| Subject: | [ts-7000] 2.6.18 hangs on reboot |
| From: | Marco Pracucci <> |
| Date: | Tue, 10 Oct 2006 09:54:06 +0000 |
Hi all,
I have just tested the TS-7200 with linux kernel 2.6.18 and derevo patch
20.1. I have experienced a problem that frequently occours: the system
hangs on reboot. In particular, after I call the reboot command
(sysvinit-2.86) the system prints
Rebooting... Restarting system.
.
and then hangs.
Green led is OFF
Red led is ON
Have you ever experienced a similar problem?
Do you have any idea and/or suggestion?
Thanks,
Marco Pracucci
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] Re: how do I mount the USB flash disk?, raratex |
|---|---|
| Next by Date: | [ts-7000] Re: Help connecting to GPS on com2, Rob |
| Previous by Thread: | [ts-7000] How do I wire the SBC, kvnherrera |
| Next by Thread: | Re: [ts-7000] 2.6.18 hangs on reboot (PATCH), Marco Pracucci |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU