[ts-7000] Re: Problem reading characters on COM3 (/dev/ttyAM2) on TS-7KV.

["Eduardo Mendiola" <>]

FYI- ttyAM2 is not the correct /dev entry. You should be 
using /dev/ttyTS0

--- In  "Eduardo Mendiola" <> 
wrote:
>
> Hi,
> 
> I'm able to read a serial device on COM2 (/dev/ttyAM2) by opening 
> the port with
> 
>     fd = open("/dev/ttyAM1", O_RDWR | O_NOCTTY | O_NDELAY);
> 
> and then, initializing it with (9600,8,n,1):
> 
>       struct termios options;
>       // Get the current options for the port...
>       tcgetattr(fd, &options);
> 
>       // Set the baud rates to 19200...
>       cfsetispeed(&options, B9600);
>       cfsetospeed(&options, B9600);
> 
>       // Set the new options for the port...
>       tcsetattr(fd, TCSANOW, &options);
> 
>       // Enable the receiver and set local mode...
>         options.c_cflag = 2096;
>         options.c_lflag = 0;
>         options.c_iflag = 4;
>         options.c_oflag = 0;
>       options.c_cflag |= (CLOCAL | CREAD);
>       options.c_cflag &= ~PARENB; // No Parity
>       options.c_cflag &= ~CSTOPB; // 1 Stop bit
>       options.c_cflag &= ~CSIZE;  // No Bit mask for size
>       options.c_cflag |= CS8;     // Size 8 bits
>         options.c_cflag &= ~CRTSCTS; // disable XON/XOFF
> 
>       // Set the new options for the port...
>       tcsetattr(fd, TCSANOW, &options);
> 
> When I try to do the same on COM3 (TS-7KV = /dev/ttyAM2), 
> no characters are read.
> 
> The ts7kvserial driver is loaded.
> 
> Am I missing something specific to the TS-7KV?
> 
> Thanks,
> 
> Eduardo
>






 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/