[ts-7000] Re: Problem reading characters on COM3 (/dev/ttyAM2) on TS-7KV.

["Eduardo Mendiola" <>]

I tested it this morning. The correct device name for COM3 on the TS-
7KV is '/dev/ttyS0' -Eduardo

--- In  "Eduardo Mendiola" <> 
wrote:
>
> FYI- ttyAM2 is not the correct /dev entry. You should be 
> using /dev/ttyTS0
> 
> --- In  "Eduardo Mendiola" <mendiolae@> 
> wrote:
> >
> > Hi,
> > 
> > I'm able to read a serial device on COM2 (/dev/ttyAM2) by 
opening 
> > the port with
> > 
> >     fd = open("/dev/ttyAM1", O_RDWR | O_NOCTTY | O_NDELAY);
> > 
> > and then, initializing it with (9600,8,n,1):
> > 
> >     struct termios options;
> >     // Get the current options for the port...
> >     tcgetattr(fd, &options);
> > 
> >     // Set the baud rates to 19200...
> >     cfsetispeed(&options, B9600);
> >     cfsetospeed(&options, B9600);
> > 
> >     // Set the new options for the port...
> >     tcsetattr(fd, TCSANOW, &options);
> > 
> >     // Enable the receiver and set local mode...
> >         options.c_cflag = 2096;
> >         options.c_lflag = 0;
> >         options.c_iflag = 4;
> >         options.c_oflag = 0;
> >     options.c_cflag |= (CLOCAL | CREAD);
> >     options.c_cflag &= ~PARENB; // No Parity
> >     options.c_cflag &= ~CSTOPB; // 1 Stop bit
> >     options.c_cflag &= ~CSIZE;  // No Bit mask for size
> >     options.c_cflag |= CS8;     // Size 8 bits
> >         options.c_cflag &= ~CRTSCTS; // disable XON/XOFF
> > 
> >     // Set the new options for the port...
> >     tcsetattr(fd, TCSANOW, &options);
> > 
> > When I try to do the same on COM3 (TS-7KV = /dev/ttyAM2), 
> > no characters are read.
> > 
> > The ts7kvserial driver is loaded.
> > 
> > Am I missing something specific to the TS-7KV?
> > 
> > Thanks,
> > 
> > Eduardo
> >
>







 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/