Hello,
> Running lcdmesg-1 with input does not seem to change this. I get no
> output at all.
>
> Has anyone seen this before?
You can find the newest lcdmesg source code here
http://www.embeddedarm.com/downloads/samplecode/lcdmesg.c. Keep in mind
this sample code is written for an alphanumeric 2x24 LCD that uses an
HD44780 Hitachi contoller. If you purchased your LCD from us then the
sample code should work, if not then you'll want to ensure you have an
LCD with the correct controller. Also you'll want to view the user's
guide to ensure the pins of your LCD are wired properly.
//Eddie
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|