[ts-7000] Problem with LCD output

["Peter Santangeli" <>]

Hi!

I'm new here, and have started working with a TS-7260. I have apps
compiling, running, etc quite happily at this point, but am having
problems with the LCD display.

I'm basing my testing on the lcdmesg-1.c code in the files section.

When I start up the board, the lcd has the top row all black, and the
bottom row all white.

Running lcdmesg-1 with input does not seem to change this. I get no
output at all.

Has anyone seen this before? 

I've plugged the LCD ribbon cable into the board I believe in the
correct orientation (the arrow and red cable indicating pin 1 to the
"dot" end of the connector).

I'm stumped.

Pete









 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/