| To: | |
|---|---|
| Subject: | Re: [ts-7000] Redboot default script |
| From: | Joe Bouchard <> |
| Date: | Wed, 30 Aug 2006 10:31:02 -0400 |
On Wed, Aug 30, 2006 at 02:06:58PM -0000, Eduardo Mendiola wrote:
> Hi,
>
> Is it possible to change the redboot default script?
>
> My application requires to mount the filesystem from a Compact Flash
> card.
>
> To manually mount it, I use Ctrl-C, then type:
> Redboot>fis load vmlinux
> Redboot>exec -c "console=ttyAM0,115200 root=/dev/hda1"
when you hit control-C, type "fconfig", and it will prompt you to create a
script, where you type in the above lines, and a blank line at the end to
finish. Then it will ask a few other questions, to which you can probably take
the defaults, and in the end it will ask something like "do you want to save?"
Hope that helps.
Joe
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] ts-7300 problems, Joe Bouchard |
|---|---|
| Next by Date: | [ts-7000] RTC on TS-7260, Tom Hansen |
| Previous by Thread: | Re: [ts-7000] Redboot default script, Ollie Eisman |
| Next by Thread: | Re: [ts-7000] Redboot default script, tmike |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU