Re: [ts-7000] accessing DIO1

To:
Subject:	Re: [ts-7000] accessing DIO1 - ts7260
From:	"Eddie Dawydiuk" <>
Date:	Mon, 28 Aug 2006 10:24:25 -0700 (MST)

Hello,

> I am just getting started with a 7260, and trying something that seems simple,
> but is not working as I would expect. I just want to "manually" control DIO1
> lines.
>
> If I use the supplied peek8/poke8 commands (in shell, not the "C" library), I
> do not seem to be able to read/write the DIO1 registers (DR at 0x80840004 and
> DDR at 0x80840014)from the shell when logged-in aas root.

Try peek32 and poke32, these are 32 bit registers. If you are still having
problems after trying these utilities please provide more information like
I entered xyz and expected to see pin N at 3.3V but using a DVM I measured
0V...

//Eddie


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] accessing DIO1 - ts7260, linux Re: [ts-7000] accessing DIO1 - ts7260, Eddie Dawydiuk <=

Previous by Date:	[ts-7000] accessing DIO1 - ts7260, linux
Next by Date:	Re: [ts-7000] debian and webcam, Ollie Eisman
Previous by Thread:	[ts-7000] accessing DIO1 - ts7260, linux
Next by Thread:	[ts-7000] ts-7300 problems, Mihai
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU

Re: [ts-7000] accessing DIO1 - ts7260