[ts-7000] accessing DIO1

To:
Subject:	[ts-7000] accessing DIO1 - ts7260
From:
Date:	Mon, 28 Aug 2006 09:33:29 -0500

I am just getting started with a 7260, and trying something that seems simple, 
but is not working as I would expect. I just want to "manually" control DIO1 
lines. 

If I use the supplied peek8/poke8 commands (in shell, not the "C" library), I 
do not seem to be able to read/write the DIO1 registers (DR at 0x80840004 and 
DDR at 0x80840014)from the shell when logged-in aas root.

Is there something I have to do to allow access to these registers?

Thanks,

Tom Z




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] accessing DIO1 - ts7260, linux <= Re: [ts-7000] accessing DIO1 - ts7260, Eddie Dawydiuk

Previous by Date:	Re: [ts-7000] debian and webcam, Christopher Friedt
Next by Date:	Re: [ts-7000] accessing DIO1 - ts7260, Eddie Dawydiuk
Previous by Thread:	[ts-7000] debian and webcam, Ollie Eisman
Next by Thread:	Re: [ts-7000] accessing DIO1 - ts7260, Eddie Dawydiuk
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU

[ts-7000] accessing DIO1 - ts7260