| To: | |
|---|---|
| Subject: | Re: [ts-7000] Changing TS-BOOTROM console default baud rate |
| From: | Curtis Monroe <> |
| Date: | Fri, 25 Aug 2006 13:10:33 -0400 |
The TS-BOOTROM is proprietary, the source code is not available. But the code
for RedBoot is available.
You can change to BOOTROM using my open source SerialBlaster utility (For
advanced users).
search the archives for more.
-Curtis.
On August 24, 2006 09:53 pm, Kym Newbery wrote:
> Hi,
>
> I have a TS-7260 which I will be running over a remote link that only
> supports up to 38400bps, so I wanted to change the TS-BOOTROM/Redboot
> default baud rate from 115200 to 38400.. but I can't find any
> references to storing the default baud rate or sources for
> TS-BOOTROM/Redboot..
>
> I know I can change the linux kernel paramters to specify the console
> baud, but it would also be nice to be able to access redboot at the
> slower rate..
>
> Cheers,
> Kym
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] Re: hello.run with TS-7KV, Eduardo Mendiola |
|---|---|
| Next by Date: | [ts-7000] adc module problem, Dale |
| Previous by Thread: | [ts-7000] Changing TS-BOOTROM console default baud rate, Kym Newbery |
| Next by Thread: | [ts-7000] Using PC104 connection, Art |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU