[ts-7000] Changing TS-BOOTROM console default baud rate

ts-7000

[ts-7000] Changing TS-BOOTROM console default baud rate

To:
Subject:	[ts-7000] Changing TS-BOOTROM console default baud rate
From:	"Kym Newbery" <>
Date:	Fri, 25 Aug 2006 01:53:45 -0000

Hi,

I have a TS-7260 which I will be running over a remote link that only
supports up to 38400bps, so I wanted to change the TS-BOOTROM/Redboot
default baud rate from 115200 to 38400..  but I can't find any
references to storing the default baud rate or sources for
TS-BOOTROM/Redboot..

I know I can change the linux kernel paramters to specify the console
baud, but it would also be nice to be able to access redboot at the
slower rate..

Cheers,
Kym







 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Changing TS-BOOTROM console default baud rate, Kym Newbery <= Re: [ts-7000] Changing TS-BOOTROM console default baud rate, Curtis Monroe

Previous by Date:	Re: [ts-7000] Working with /dev/rtc, Mike Magee
Next by Date:	Re: [ts-7000] Re: COM2 Pinouts, John-Mark Gurney
Previous by Thread:	[ts-7000] industrial touch screen panel for the ts-7300, Dave Cramer
Next by Thread:	Re: [ts-7000] Changing TS-BOOTROM console default baud rate, Curtis Monroe
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU